Michelin Wild Enduro Racing Line Tyre Front 29 x 2.40" (61-622)

£72.99

Front - 29 x 2.40"
Rear - 29 x 2.40"
Out of stock.
Please contact us as more may be on order.
Part Number:

MIC-475741

GTIN:

3528704757411

Prepare for a next-level cycling experience with Michelin's Wild Enduro Racing Line Tyre. Specifically designed for front wheel usage, this tyre promises to redefine what you thought possible on two wheels.

The Michelin Wild Enduro Racing Line Tyre stands out with its distinctive blend of features. Crafted using cutting-edge Magi-X DH technology, the tyre is armed with a sticky and durable rubber compound. This optimises grip levels under various weather conditions, on diverse kinds of terrain. It also performs consistently across a wide temperature range, proving its adaptability and resilience in the face of challenging rides.

This tyre is also equipped with a robust Double Defense 4X-Ply and low-pressure reinforcement. This enhances resistance to damage, increases lateral stability, and delivers excellent handling even at lower pressures. Moreover, its double-reinforced Downhill Shield offers an anti-puncture reinforcement feature, promoting a safer and smoother ride.

At the highest levels of professional sports, and among riders who aggressively tread on enduro-type terrain, Michelin Wild Enduro Racing Line Tyres are the preferred choice. Adaptable for all racing bikes today, the Wild Enduro Racing Line is specifically designed to offer the highest levels of grip, even under challenging conditions. So prepare to take that corner at high speeds without a shred of doubt, with Michelin's Wild Enduro Racing Tyres ensuring an unforgettable cycling journey!

With the Michelin Wild Enduro Racing Line Tyre, riders can conquer terrains, weather conditions, and temperatures with utmost confidence, challenging the limits of what two wheels can accomplish. This is the perfect tyre for those yearning to upgrade their racing or everyday biking experience!

Enjoy the energy of speed, experience the thrill of control, and embark on a ride worth remembering with Michelin's Wild Enduro Racing Line Tyre.

STANDARD TYRE FITTING
(with inner tube)

  1. Carefully check the condition of the rim. A poor-condition, broken or cracked rim must be replaced as it could cause leaks and be dangerous.
  2. Check the condition of the rim tape. Broken or cracked tape must be replaced as this often causes punctures.
  3. Insert the 1st bead into the rim.
  4. Slightly inflate the inner tube to make it round and insert it into the tyre, starting with the valve. For latex inner tubes, do not forget to apply talc to make it easier to position it in the tyre.
  5. Repeat for the 2nd bead starting on the opposite side to the valve and positioning the bead at the bottom of the rim. Finish off fitting near to the valve.

TUBELESS READY

A Tubeless Ready tyre is a tyre that can be fitted without an inner tube. It is made airtight using sealant rather than an inner tube.

To fit a tubeless tyre:

  1. Use a UST Tubeless wheel.
  2. Add sealant.
  3. Comply with the maximum pressure indicated on the tyre sidewall.

TUBELESS

  1. Use a UST-Tubeless rim. Carefully check the condition of the rim. A poor-condition, broken or cracked rim must be replaced as it could cause leaks and be dangerous.
  2. The rim must be lubricated all over to make it easier to move around when fitting the tyre but mainly so it can be centered perfectly.
  3. The lubricant must be soapy water type or equivalent (no oil or grease).
  4. Start by positioning the first bead on the opposite side to the valve, taking care to position the bead at the bottom of the well.
  5. Inflate the tyre until it is in position without exceeding the maximum pressure indicated on the sidewalls and make sure that the tyre is properly centered. Adjust the pressure after cycling a few miles.

REMOVING

  1. Loosen the beads from around the rim.
  2. Push them to the bottom of the well.
  3. Carefully position a tyre lever on either side of the valve (about 10cm) and lift the tyre over the rim hook.
  4. Work one of the levers around the rim between the hook and bead to fully remove the first bead.
  5. Extract 2nd bead by hand.

RIM TAPE

This protects the inner tube in contact with the rim, preventing it from being damaged by spoke ends once it is inflated. It must be the width of the rim cavity. There is a Tubeless version for Tubeless and Tubeless Ready tyres.

Colours Black
Sizes Front - 29 x 2.40", Rear - 29 x 2.40"
Brand Michelin
Barcodes 3528704757411, 3528706618406
SKUs / Part Numbers MIC-475741, MIC-661840

Please note: Manufacturers can sometimes change the specification of the products from time to time.